FLATCOB80

FlatCob 80

DISCONTINUO

Order Code: FLATCOB80

Source
80W RGB LED
IP rating
 IP20
Weight
2kg / 4.41lbs 

Key Features

  • 80W RGB COB LED source for limit-less vivid colours
  • LED + parabolic reflector featuring classic PAR CAN concept applying new LED technology
  • Interchangeable optics: 60° without optics, 30° included
  • Silent operation and HD dimming system with adjustable PWM for studio application
  • USB port for USB WIFI transceiver (optional)

FlatCob 80 is a compact LED projector equipped with a COB source that allows to place a bright RGB/FC 80W LED in a super-slim housing. The light source features 60° beam angle with a magnetic lens holder (included) to switch the projection at 30°. FlatCob 80 can be controlled wirelessly through the optional USB WIFI transceiver in combination with WIFIBOX and the SmartColor app or through IR remote.

Read less
FlatCob 80 is a compact LED projector equipped with a COB source that allows to place a bright RGB/FC 80W LED in a super-slim housing. The light source features 60° beam angle with a magnetic lens hol...

Photo Gallery

FLATCOB80
FLATCOB80
FLATCOB80
FLATCOB80
FLATCOB80

Specifications

LIGHT SOURCE
  • Source: 80W RGB LED
  • Luminous flux: 1'511
  • Lux: (60°) 171 lx - (30°) 923lx @3 m full
  • Source life expectancy: > 50.000 h
OPTICS
  • Beam angle: 18° - 52°
  • Field angle: 31° - 96°
  • Lens type: reflector with collimator to achieve asymmetric beam diffusion
  • Additional optics: 30° (inc)
COLOUR SYSTEM
  • White presets: 3.200 K ~ 10.000K
  • Colour wheel: virtual colour wheel with macros
  • Macros: built-in white presets
DYNAMIC EFFECTS
  • Static mode: selection of static colour
  • Manual mode: manual adjustment of colour
  • Auto mode: built-in programs with execution speed adjustment
  • Sound mode: music activation through internal microphone and sensitivity control
CONTROL
  • Supported Protocols: DMX512
  • DMX channels: 3 / 8ch
  • Display: LED display user interface
  • IR: infrared sensor controlled by remote
  • Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
  • Dimmer: linear 0 - 100% electronic dimmer
  • Dimmer curves: 4 selectable dimming modes available
  • Strobe / shutter: 1 - 28 Hz, electronic
  • Firmware upgrade: via DMX with UPBOXPRO/UPBOX1 (not included)
CONNECTIONS
  • Power connection: IEC IN/OUT connectors
  • Signal connection: XLR 3p IN/OUT connectors
  • Wireless Connection: optional WIBOX, WDBOX proprietary protocol
  • Data: USB port for USB WIFI transmitter (optional)
ELECTRICAL
  • Mains power supply: 100-240V - 50/60Hz
  • Max power consumption (230V): 56W
  • Output (at 230V): 23 units on a single power line
  • Max power consumption (120V): 55,6W
  • Output (at 120V): 12 units on a single power line
PHYSICAL
  • IP rating: IP20
  • Cooling: fan-free with natural convection
  • Housing: Sturdy die-cast aluminium body
  • Finish: black
  • Operating temperature: Ta -10 to +45 °C (+14 to +113 °F)
  • Dimensions (WxHxD): 200x162x230mm / 7.87''x6.38''x9.06''
  • Weight: 2kg / 4.41lbs
INSTALLATION
  • Suspension and fixing: double bracket for hanging and floor positioning
CERTIFICATIONS / REPORTS
  • Compliance: CE, UKCA
BOX CONTENT
  • 1 x FLATCOB80
  • 1 x 1,5 meters BARE END - IEC power cable

Accessories & Related Products

(Optional) WIFIUSB

USB Wi-Fi transreceiver, compatible with WIFIBOX and WDBOX

Order Code: WIFIUSB

(Optional) WIFIBOX

DMX controller interface, Wi-Fi/DMX IN, Wi-Fi / DMX OUT

Order Code: WIFIBOX

(Optional) WDBOX

Wireless DMX Transceiver, IN/OUT 3-pin XLR, distance 200m, 2.4 GHz, 0.6 kg

Order Code: WDBOX

(Optional) LUMIPARIRCH

RGBWA IR remote controller, manual / auto modes, for LUMIPAR IR series

Order Code: LUMIPARIRCH

(Optional) UPBOXPRO

Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

Order Code: UPBOXPRO

Downloads

Technical documentation and support files

Data sheet & specs Data sheet & specs

File name File size Download
Letter datasheetFlatcob80_A4_DATASHEET.pdf(03/12/2020)247KB

User manual User manual

File name File size Download
User manualFlatcob80_USER_MANUAL_ITEN.pdf(11/01/2019)2MB

DMX chart & personalities DMX chart & personalities

File name File size Download

FLATCOB80 Firmware rev. 1.6

manufacturer fixture library (Link) Link
prolights_flatcob80.d4Download
manufacturer fixture library (Link) Link
prolights_flatcob80_8ch.hed Download
manufacturer fixture library (Link) Link
flatcob80_3ch.fdf Download
flatcob80_8ch.fdf Download
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link

CAD symbols & drawings CAD symbols & drawings

File name File size Download
2DFlatcob80_CAD_2D.dwg(21/08/2018)1MB
3DFlatcob80_CAD_3D.dwg(25/01/2020)29MB

Firmware


Firmware Update Information

Methods are listed in the product specs - ELECTRONICS > Firmware upgrade.

Method / Device Extension Required software Instructions
UPBOXPRO (*) .PRL UpBox_Tool Guide
USB port .PRL No software needed see User Manual
Ethernet port .EHEX Professional Uploader Guide
Ethernet port .ALF DMX Workshop Guide

(*) UPBOX1 and UPBOX2 are still usable - check compatibility on the product accessories page. UPBOX2 requires drivers from this link.

Note: Some products without DMX or USB inputs may require an additional device and may not be compatible with UPBOXPRO - see the products list.

Update procedure
  1. Check the update methods on your product (ELECTRONICS> Firmware upgrade).
  2. Download the firmware and the dedicated software.
  3. Follow the update guide included in the firmware folder.

Need help?
support@prolights.it

Update Tool: UPBOXPRO UPBOXPRO
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
1.6 STABLE 12/07/2016 Improved firmware functionality with 24 bytes consoles. Rev. 1

Info Request

NEWSLETTER

Subscribe to our Newsletter

Loading...