SMARTBATWASH
PROLIGHTS


Smart BatWash

ORDER CODE: SMARTBATWASH

15x20W LED Wash Light, IP65 rated, with an RGB + Warm White LED source, wirelessly controlled with battery or wired with mains power

The Smart BatWash is a high-powered LED Wash light that can be operated wirelessly or wired. 
This IP65 Wash Light has 15 x 20W RGB + Warm White LED emitters, and it's Spektra™ calibrated to guarantee consistency, high-quality white values (CRI >93), a dynamic array of true colours with smooth colour mixing, and a powerful 6,282-lumen output. 
The Smart BatWash is very flexible - it can be used wirelessly with the built-in battery, using CRMX or W-DMX or, alternatively, wired with power and data cables, bypassing the battery and enabling higher brightness levels. 
The beam angle can easily be adjustable through a magnetic beam shaper filter, allowing a broader coverage whilst keeping a high output. The Smart BatWash has all the software features of the Ecl range, sharing the same user settings and capabilities.

SPEKTRAMain features:

  • High-powered IP65 LED Wash light, wireless (CRMX+W-DMX)/wired control, battery/AC power
  • 15x20W RGB + Warm White LED source, powerful 6,282-lumen output high CRI (>93)
  • Range of holographic filters that modify the shape of the beam angle
See variants

PHOTO GALLERY

Smart BatWash
Smart BatWash
Smart BatWash
Smart BatWash
Smart BatWash
Smart BatWash
Smart BatWash

Technical specifications

LIGHT SOURCE
  • Source: 15x20W RGB + Warm White LED
  • Luminous flux: 6'300 lm @full
  • Lux: 4'451lx @5 m full
  • CRI: > 95 @3200K ; > 93 @5600K
  • R9: > 98 @3200K ; > 93 @5600K
  • TLCI: > 84 @5600K
  • TM30 Rf: 94.2 @3200K ; > 92 @5600K
  • TM30 Rg: 104.4 @3200K ; > 105 @5600K
  • Source life expectancy: > 50.000 h
OPTICS
  • Beam angle: 10°
COLOUR SYSTEM
  • Colour mixing: RGBWW
  • CCT: CCT control through dedicated DMX channel
  • White presets: 2'800K - 10'000K
  • Colour wheel: virtual colour wheel with macros
  • Macros: built-in white presets
DYNAMIC EFFECTS
  • Control Resolution: 16-bit dimmer, colours
  • Static mode: selection of static colour
  • Manual mode: manual adjustment of colour
  • Auto mode: built-in programs with execution speed adjustment
BODY
  • Body: sturdy die-cast aluminium body
  • Body colour: RAL 9004
CONTROL
  • Protocols: CRMX+W-DMX, DMX512, RDM
  • Wireless Control: included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
  • RDM: RDM for remote monitoring and settings
  • Display: Graphic User Interface
  • Firmware upgrade: yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
  • IR: infrared sensor controlled by remote
  • Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
  • Dimmer: linear 0 ~ 100% electronic dimmer
  • Dimmer curves: 4 selectable dimming modes available
  • Strobe / shutter: 1 - 30 Hz, electronic
  • Operating temperature: 0° ~ +45°
  • LED Control: flicker free operation
  • Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
  • Mains power supply: 100-240V - 50/60Hz
  • Max power consumption: 180W
  • Output (at 230V): 11 units on a single power line
  • Output (at 120V): 5 units on a single power line
  • Power factor: >0,94
BATTERY
  • Battery: 16,8V lithium
  • Estimated battery life: Selectable 3h / 6h / 8h / 12h / 16h / 18h
  • Re-charge connection: Directly from the mains power or magnetic fast-charge in case
  • Re-charge time: 5h/max
  • Battery status: shown on display
  • Other: Battery recharge in AC and DC, operation in main power with possibility to disable battery recharge throught software and charging operation in flightcase
PHYSICAL
  • IP rating: 65 for temporary outdoor application, not for fixed installations
  • Cooling: passive cooling and fan-free
  • Suspension and fixing: any position with quick-lock omega brackets
  • Signal connection: IP65 Seetronic XLR 5p IN/OUT connectors
  • Power connection: magnetic DC connector for battery recharge and Seetronic powerCON TRUE IP65 IN/OUT connector
  • Dimensions (WxHxD): 381x344x143mm / 15''x13.54''x5.63''
  • Weight: 9,8kg / 21.61lbs
CERTIFICATIONS / APPROVALS
  • Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC
BOX CONTENT

Versions

Accessories & Related Products

FCLSMARTBATWASH
FCLSMARTBATWASH
(optional)
Flight case for 4 SMARTBATPLUSWASH, internal AC battery charging
SBWFILTER25
SBWFILTER25
(included)
25° symmetric light diffusion filter for SMARTBATWASH
SBWFILTER40
SBWFILTER40
(optional)
40° symmetric light diffusion filter for SMARTBATWASH
SBWFILTER1060
SBWFILTER1060
(optional)
10x60° asymmetric light diffusion filter for SMARTBATWASH
SBWBD
SBWBD
(optional)
Black barn door 4 directional flaps to adjust the light beam, comp. SMARTBATWASH
OS25D13
OS25D13
(included)
Quick-Lock omega bracket, M12 hole
SBWPOWER
SBWPOWER
(optional)
Single charger for SMARTBATWASH
PRL-IRC
PRL-IRC
(optional)
RGBWA IR controller, 29 buttons, manual/static colours, auto programs, fade
C6002B
C6002B
(optional)
Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black
RSR0630B
RSR0630B
(optional)
Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
9533FXWL03
9533FXWL03
(optional)
Ass. 3x2.5mm TH07 cable, SCHUKO plug, MENAC3FXW socket, L.3m
LRLUNA
LRLUNA
(optional)
Single Universe DMX transceiver with Bluetooth
IPTESTBOX
IPTESTBOX
(optional)
Portable vacuum and pressure tester for ProLights IP fixtures
<b>Upbox</b> 1
Upbox 1
(optional)
Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
UPBOXPRO
UPBOXPRO
(optional)
Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

DOWNLOAD

Data sheet & specs

File name File size Download
Letter datasheet Smartbatwash_A4_DATASHEET_(EN).pdf 690KB
Letter datasheet Smartbatwash_LETTER_DATASHEET_(EN).pdf 704KB
Tender Specification Smartbatwash_TENDER_SPECIFICATION.pdf 3MB

User manual

DMX chart & personalities

File name File size Download
DMX chart Smartbatwash_DMX_CHARTS.pdf 116KB
VectorWorks VECTORWORKS_SYMBOLS.vwx 692KB
VectorWorks PROLIGHTS_VECTORWORKS_v24_LIBRARY.vwx 310MB
VectorWorks PROLIGHTS_VECTORWORKS_v19_LIBRARY.vwx 478MB
SMARTBATWASH Firmware rev. 1.1.01.0
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link

Photometrics

CAD symbols & drawings

File name File size Download
3D sketchup SMARTBATWASH_3D_SKETCHUP.zip 3MB
2D SMARTBATWASH_2D.zip 49MB
3D SMARTBATWASH_3D.zip 2MB
2D cad symbols Smartbatwash_2DSYMBOLS.dwg 49KB
Technical drawing SMARTBATWASH_TECHNICAL DRAWINGS.zip 3MB

Tech docs

File name File size Download

Software

File name File size Download

Firmware

Firmware update instructions

1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

2 Download the updater software UpBox_Tool 

3 Follow the instructions in the following guide
-------------------------------------------------------------------------------
Notes: 
  • Firmware updates require the UPBOXPRO compatible with all Prolights products
  • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
  • UpBox_Tool  software is compatible with all UPBOX interfaces
  • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
1.1.01.0 STABLE 24/02/2023 New functions:
  • Power Mode selector replaces FIXTURE TYPE.
    Power Mode selector allows you to select between 3 options:
    • BATTERY: 
      • If fixture is being used (Standalone or DMX/WDMX Active) and AC is plugged in, fixture will draw power from the mains and status of light output won't be affected (only max power will be higher than what available on battery).
      • If fixture is being used (Standalone or DMX/WDMX Active) and AC is plugged out, fixture will draw power from the battery and status of light output won't be affected (only max power will be reduced) .
      • Pressing Power button for 3 seconds without mains present --> fixture will turn on and follow its settings (Standalone or DMX/WDMX)
      • Pressing Power button for 3 seconds while using without mains present --> fixture will turn off.
      • Pressing Power button for 3 seconds while charging --> fixture will turn on and follow its settings (Standalone or DMX/WDMX), or would keep charging if nothing is setted/no signal received
      • Pressing Power button for 3 seconds while using with mains present--> fixture will turn off and start charging.
      • Plugging Mains power for 3 seconds while fixture is off --> fixture will start charghing.
      • Plugging Mains power OFF for 3 seconds while fixture is charghing --> fixture will stop charging and turn off.
    • AC: 
      • Fixture operates as a standard AC fixture. When AC is plugged in, fixture will turn on and operate normally.
      • If Battery recharge is enabled, battery will be recharged as soon as dimmer is = 0 or by pressing the power button for 3 seconds.
      • If Battery recharge is disabled, battery won't be recharged.
      • Fixture will turn off as soon as AC is plugged out.
    • AC EMERGENCY: 
        • Fixture operates as a standard AC fixture. When AC is plugged in, fixture will turn on and operate normally.
        • If Battery recharge is enabled, battery will be recharged as soon as dimmer is = 0 or by pressing the power button.
        • If Battery recharge is disabled, battery won't be recharged.
        • Fixture will turn on at full power with 6000K White as soon as AC is missing. To turn off the fixture user can use control channel dedicated parameter or power button on the fixture.
  • Spektra Calibration: new modes available
      • ON: CCT and colors are fully calibrated, working in the common color space definition set by Spektra. This means that output of multiple fixtures will match with no visible differences. Color Saturation is slightly reduced.
      • PURE COLORS: CCT is calibrated, giving perfect white matching across multiple fixtures, but primary and secondary colors are calibrated to their native color space which allows maximum color saturation. The closer you move towards white, the more closely multiple fixtures will match each other's output. The further you move away from white and the closer you move towards saturated color, the less closely multiple fixtures will match each other's output.
      • OFF: CCT doesn't guarantee High CRI Values and color output of one fixture may or may not closely match that of other fixtures.Spektra Calibration: new modes available
Improvements:

  • Power On/Off button requires 3 seconds to take effect.
  • The transition from Power mode Emergency to DMX/WDMX signal is instantaneous and the fixture not produce any fade when it acquires the signal.
  • Improved sync on Stand Alone Effects mode.
  • Improved dimming performances.
  • Jump prediction added to crossfade channel.
Fixed bugs:
  • After setting AC EMERGENCY and removing the AC power cable, the device enters the emergency mode correctly, but by setting power mode BATTERY afterwards, it remains in emergency mode switching off the light source.
  • Even if Factory Reload is performed, it is not possible to exit EMERGENCY mode to return the device to default settings. It is necessary to power cycle the fixture.
  • When the device is not connected to any data signal, passing from Stand Alone MANUAL COLORS to Stand Alone SLAVE, the light source switches off producing a fade.
  • Power mode BATTERY, Battery recharge ENABLE: Connecting the data signal when the device is off and then connect the AC power cord, the device enters charging mode successfully. However, forcing the power on by pressing the power button, the fixture does not exit the charging mode and, consequently, does not turn on the light source based on the data signal.
Note: In order to perform the update correctly, fixture needs to be on FW 1.1.00.0 or higher.
          If the fixture has FW release < 1.1.00.0, please update to 1.1.00.0 first.		 Rev. 1.0

Info Request

News

24 April 2024
PROLIGHTS introduces AetherBox LITE
PROLIGHTS introduces AetherBox LITE
PROLIGHTS introduces the AetherBox LITE , a single-universe Wireless CRMX Transceiver designed to enhance lighting control in professional...
22 April 2024
PROLIGHTS products lights up the Nacht der Werbung event in Salzburg
PROLIGHTS products lights up the Nacht der Werbung event in Salzburg
PROLIGHTS' lighting solutions lit up the "Nacht der Werbung" event in Salzburg, hosted at the Mozarteum, where the Salzburg State Prize...
19 April 2024
PROLIGHTS Shines at the Mercedes-Benz AMG GT Launch in Poland
PROLIGHTS Shines at the Mercedes-Benz AMG GT Launch in Poland
Duda-Cars, in collaboration with event specialists Kukoni, unveiled the new Mercedes-Benz AMG GT in Poland, a dazzling event illuminated...
16 April 2024
The Astra Profile600IP Lights Illuminate St. Anton's Slopes
The Astra Profile600IP Lights Illuminate St. Anton's Slopes
In St.Anton, Austria, the ski season is transformed into a vivid spectacle of lights, thanks to the Astra Profile600IP . The event,...
09 April 2024
The Astra Wash19Pix Lights Up the Australian Chinese New Year Gala
The Astra Wash19Pix Lights Up the Australian Chinese New Year Gala
The  Astra Wash19Pix by PROLIGHTS illuminated the annual Chinese New Year Gala in Australia for 2024, held at the Adelaide Entertainment...
05 April 2024
PROLIGHTS fixtures light up Madame Tussauds museum in Budapest
PROLIGHTS fixtures light up Madame Tussauds museum in Budapest
PROLIGHTS products have lit up the new Madame Tussauds museum in Budapest. The project was followed by the system integrator company...
03 April 2024
PROLIGHTS Introduces High-Definition Optics for Enhanced Projection Quality
PROLIGHTS Introduces High-Definition Optics for Enhanced Projection Quality
PROLIGHTS announces the launch of the High Definition Optics for the Ecl Display series. Engineered to redefine projection quality,...
29 March 2024
PROLIGHTS Smart BatPlus at Buckingham Palace
PROLIGHTS Smart BatPlus at Buckingham Palace
PROLIGHTS Smart BatPlus , provided by Luminosity Lighting Services Ltd, illuminated the Blue Room and Music Room of Buckingham Palace...
26 March 2024
PROLIGHTS expands the EclDisplay range with the new EclDisplay CAS featuring integrated Casambi control
PROLIGHTS expands the EclDisplay range with the new EclDisplay CAS featuring integrated Casambi control
PROLIGHTS is thrilled to announce the introduction of the EclDisplay CAS , the latest addition to the EclDisplay projector range for...
22 March 2024
PROLIGHTS EclPar IPMFC impress at RESOLUTION X
PROLIGHTS EclPar IPMFC impress at RESOLUTION X
When Resolution X saw the PROLIGHTS EclPar IPMFC multipurpose LED fixture, they knew it was the perfect fit for a special long-term...
19 March 2024
PROLIGHTS illuminates ERT 3 studios
PROLIGHTS illuminates ERT 3 studios
The ERT 3 studios have upgraded their lighting system by introducing the EclPanel TWC and EclFresnel CT+M by PROLIGHTS into their inventory....
12 March 2024
PROLIGHTS products Illuminate Swan Park Theatre
PROLIGHTS products Illuminate Swan Park Theatre
Swan Park Theatre, a cornerstone of the arts within the City of Swan, has experienced a transformative upgrade in its lighting setup,...
Subscribe to our Newsletter
Follow us, stay connected facebook instagram youtube twitter tiktok linkedin
Loading...