LUMIPIX12UQPRO

LumiPix 12UQPRO

Order Code: LUMIPIX12UQPRO

Source
12x8W RGBW LEDs
IP rating
 IP20
Weight
3,3kg / 7.28lbs 

Key Features

  • Pixel control: section control
  • Advanced on-board effects generation
  • USB port for USB WIFI transceiver (optional)
  • Flicker-free operations

LumiPix 12UQPRO is a 1 m long linear colour changer equipped with 12 high-efficiency RGBW/FC LED (8W each). The control system is customisable allowing section control and advanced possibilities in effect generation such as LED video or sound activated arrays.

Read less
LumiPix 12UQPRO is a 1 m long linear colour changer equipped with 12 high-efficiency RGBW/FC LED (8W each). The control system is customisable allowing section control and advanced possibilities in ef...

Photo Gallery

LUMIPIX12UQPRO
LUMIPIX12UQPRO
LUMIPIX12UQPRO
LUMIPIX12UQPRO

Specifications

LIGHT SOURCE
  • Source: 12x8W RGBW LEDs
  • Luminous flux: 2'436
  • Lux: 1'884lx @3 m full
  • Source life expectancy: > 50.000 h
OPTICS
  • Beam angle: 20°
  • Field angle: 36°
  • Lens diameter: 38mm / 1.5''
  • Additional optics: 45° (optional)
COLOUR SYSTEM
  • Colour mixing: RGBW / FC
  • Colour wheel: virtual colour wheel with macros
  • Macros: several pre-built pixel macros with adjustable speed
DYNAMIC EFFECTS
  • Static mode: selection of static colour
  • Manual mode: manual adjustment of colour
  • Auto mode: built-in programs with execution speed adjustment
  • Sound mode: music activation through internal microphone and sensitivity control
BODY
  • Body: sturdy die-cast aluminium body
  • Body colour: black
CONTROL
  • Protocols: DMX512
  • DMX channels: 4 / 7 / 9 / 12 / 17channel
  • Pixel control: 1 / 3 section control
  • Wireless Control: Optional proprietary protocol compatible with WIFIBOX, WDBOX
  • Display: LED display user interface
  • Firmware upgrade: via DMX with UPBOXPRO/UPBOX1 (USB-DMX interface not included)
  • IR: infrared sensor controlled by remote
  • Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
  • Dimmer: linear 0 ~ 100% electronic dimmer
  • Dimmer curves: 4 selectable dimming modes available
  • Strobe / shutter: 1 - 28 Hz, electronic
  • Operating temperature: 0° ~ +45° Ta
  • LED Control: flicker free frequency with adjustable PWM
ELECTRICAL
  • Mains power supply: 100-240V - 50/60Hz
  • Max power consumption: 73,6W
  • Max power consumption (at 120V): 71W
  • Output (at 230V): 19 units on a single power line
  • Output (at 120V): 7
PHYSICAL
  • IP rating: IP20
  • Cooling: natural convection cooling enabled by a fanless design and a chassis engineered for passive heat dissipation
  • Suspension and fixing: double hanging bracket suitable for safe hanging and for floor positioning
  • Data: USB port for USB WIFI transmitter (optional)
  • Signal connection: XLR 3p + 5p IN/OUT connectors
  • Power connection: Seetronic powerCON IN/OUT connectors
  • Dimensions (WxHxD): 1000x56x168mm / 39.37''x2.2''x6.61''
  • Weight: 3,3kg / 7.28lbs
CERTIFICATIONS / APPROVALS
  • Certifications / Approvals: CE, UKCA, RCM
BOX CONTENT
  • 1 x LUMIPIX12UQPRO
  • 1 x 1,5 meters power cable (BARE END - SEETRONIC power connector)
  • User Manual

Accessories & Related Products

Optional C6002B

Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black&White& White

Order Code: C6002B

Optional TOUR53415L03

Dmx cable HC5340. CANC5MXX XLR 5p->CANC5FXX XLR (f) 5p, L.3m

Order Code: TOUR53415L03

Optional TOUR53413L03

Dmx cable HC5340. CANC3MXX XLR 3p->CANC3FXX XLR (f) 3p, L.3m

Order Code: TOUR53413L03

Optional RSR0630B

Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black

Order Code: RSR0630B

Optional <b>WIFI</b>-USB

USB Wi-Fi transreceiver, compatible with WIFIBOX and WDBOX

Order Code: WIFIUSB

Optional <b>WIFI</b>-Box

DMX controller interface, Wi-Fi/DMX IN, Wi-Fi / DMX OUT

Order Code: WIFIBOX

Optional <b>WD</b>-Box

Wireless DMX Transceiver, IN/OUT 3-pin XLR, distance 200m, 2.4 GHz, 0.6 kg

Order Code: WDBOX

Optional LUMIPARIRCH

RGBWA IR remote controller, manual / auto modes, for LUMIPAR IR series

Order Code: LUMIPARIRCH

Optional UPBOXPRO

Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

Order Code: UPBOXPRO

Included ARCLUMIL25D38

Optic lens 15°, D.38mm

Order Code: ARCLUMIL25D38

Optional ARCLUMIL45D38

Optic lens 45°, D.38mm

Order Code: ARCLUMIL45D38

Downloads

Technical documentation and support files

Data sheet & specs Data sheet & specs

File name File size Download
Letter datasheetLumipix12uqpro_A4_DATASHEET_(IT).pdf(30/04/2021)138KB
Letter datasheetLumipix12uqpro_A4_DATASHEET(EN).pdf(02/09/2021)139KB

User manual User manual

File name File size Download
User manualLumipix12uqpro_USER_MANUAL_ITEN.pdf(09/10/2017)1MB

DMX chart & personalities DMX chart & personalities

File name File size Download
DMX chartLumipix12uqpro_DMX_CHARTS.pdf(10/02/2018)52KB

Photometrics Photometrics

File name File size Download
IESprolights_lumipix12uqpro_ies_files.zip(27/05/2025)193KB
LDTprolights_lumipix12uqpro_ldt_files.zip(27/05/2025)194KB
PhotometricsLumipix12uqpro_PHOTOMETRICS_REPORT.pdf(27/05/2025)1MB
DialuxDownload DIALux product catalogue-

CAD symbols & drawings CAD symbols & drawings

File name File size Download
3D RFALumipix12uqpro_3D.rvt(09/03/2020)375KB
3D SKPLumipix12uqpro_3D.skp(27/03/2020)280KB
2DLumipix12uqpro_CAD_2D.dwg(25/02/2021)933KB
3DLumipix12uqpro_CAD_3D.dwg(18/02/2020)658KB
2D cad symbolsLumipix12uqpro_CAD_2DSYMBOLS.dwg(09/03/2020)19KB
Technical drawingLumipix12uqpro_TECHNICAL_DRAWING.pdf(25/02/2021)171KB
VectorWorksVECTORWORKS_SYMBOLS.vwx(09/03/2020)177KB
VectorWorksPROLIGHTS_VECTORWORKS_v2025_LIBRARY.vwx(13/05/2025)321MB
VectorWorksPROLIGHTS_VECTORWORKS_v2020_LIBRARY.vwx(13/05/2025)276MB

Firmware


Firmware update instructions

1 Download the firmware (complete download is available on Customer Care - contact support@prolights.it for more info)

2 Download the updater software UpBox_Tool 

3 Follow the instructions in the following guide
-------------------------------------------------------------------------------
Additional info:
  • Firmware updates require the UPBOXPRO compatible with all Prolights products
  • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
  • UpBox_Tool  software is compatible with all interfaces (UPBOXPRO, UPBOX1 and UPBOX2)
  • It's possible to update NET boards (with .EHEX files) following this guide with software Professional Uploader 
Update Tool: UPBOXPRO UPBOXPRO
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
1.2 STABLE 04/11/2021 New functions:
  • Added LED FREQUENCY option (250 Hz, 500Hz, 1000 Hz, 2000 Hz, 4000 Hz).

Info Request

News

PROLIGHTS illuminate Amber & John's performance at Lotus Club Marrakech

PROLIGHTS illuminate Amber & John's performance at Lotus Club Marrakech
Fontys University in The Netherlands gets PROLIGHTS

Fontys University in The Netherlands gets PROLIGHTS
Vilnius City Hall modernises its lighting system with PROLIGHTS

Vilnius City Hall modernises its lighting system with PROLIGHTS
Fontys School of Arts gets PROLIGHTS

Fontys School of Arts gets PROLIGHTS

NEWSLETTER

Subscribe to our Newsletter

Loading...