OmegaPix 26B

ORDER CODE: OMEGAX26B

2,6 mm pixel pitch indoor rental LED screen

OmegaPix 26B is a revolutionary indoor 2,6 mm LED screen rental panel. Specially designed to offer advanced mechanical features, more creative configurations and superior video image quality. 
 
Mechanical / assembly features: 

  • Curve configurations both concave and convex through curving mounting plates (0-10 concave, 0-5 convex)
  • Seamless 90° corners through special 45° cutter cabinets (Left & Right version available)
  • Front service of magnetic replacement of the LED module for immediate service
  • Climbable, designed for a quick maintenance access
  • Hot swapping of the back panel to replace PSU & electronics
  • Assisted mounting magnets allowing for a one-man quick setup
  • Ground stacking accessories available
  • Corner protection for additional safe transport in case
  • Velcro edged to avoid any gaps
  • Fly bars are suitable for both hanging or ground stacking application:

 
Components / electronic features:

  • Premium Components
  • Module with memory to store calibration database
  • Magnetic front and back LED module replacement
  • Black mask for superior contrast and rentability
  • 18 bit+ greyscale (4x high than the market average)
  • Rotation function enabled
  • New Novastar A8s receiver
  • IP powerCON IN/OUT
  • IP dataCoN IN/OUT
  • CE, EMC, UL approved

 
Image quality:

  • New Novastar A8s receiving card
  • 18 bit+ greyscale, x4 higher than the market average. Effectively improved greyscale performance under low-brightness, showing more exquisite and expressive images. 
  • ClearView technology used adjusting the texture, size and contrast of images in different areas to further enhance the image details. 
  • Smart gamma correction: gamma correction is automatically applied according to the display brightness, achieving a better greyscale performance and providing clearer pictures. 
  • Rotation enabled: rotation of panels recognised by software @ 360° 
  • RCFGX restore, firmware copy, mapping MCTRLR5 sending fully supported

Main features:

  • 2,6 mm pixel pitch indoor rental LED Screen
  • Seamless 90° angles
  • Curve configurations, concave and convex
  • Fly bar hanging/stacking
  • New Novastar A8s with 18bit+, ClearView and image rotation

PHOTO GALLERY

Technical specifications

VIDEO
  • Driver chip type: MBI 5252
  • LED source: SMD 2121 full black
  • Pixel pitch: 2.6mm / 0.1''
  • Panel resolution: 192x192pixels
  • Module resolution: 96x96pixels
  • Luminous flux: 1.000nit
  • Contrast: 3.000:1
  • Grayscale: 18 bit
  • Refresh rate ≥: 3.840Hz
  • Drive Mode: 1/16 scan, constan current
  • Vertical viewing angle: 120°
  • Horizontal viewing angle: 140°
  • LED density: 147.456LED/sqm
  • Dead Pixel Ratio: <0,002
  • LED avg life span: 100.000
ELECTRICAL
  • Power input/output: IPKON Seetronic IN/OUT
  • Power supply: AC 110/230 V 50/60 Hz
  • Max power consumption (panel): 160W
  • Avg power consumption (panel): 40W
  • Max power consumption (sqm): 640W
  • Avg power consumption (sqm): 160W
  • Standby power consumption (pannello): 20W
  • Max rated current/panel:: AC 220 V / 0.55 A
  • Working temperature: -10°C / +45°C
  • Working humidity: 10~80 RH%
CONTROL
  • Receiving card type: A8S
  • Other controllers type: rotation, 18bit+, clearview, mapping, firmware copy, RCFGX restore, calibration restore
  • Control protocol: Novastar
  • Signal input: IP data Seetronic IN
  • Signal output: IP data Seetronic OUT
MECHANICS
  • Magnetic LED modules: available
  • Other specifics: curve configurations, climbable, rear panel swapping, corner protection for transport, velcro strips for gapless mounting
  • Module size (WxH): 250x250mm / 9.84''x9.84''
  • Panel size(WxHxD): 500×500×90.6mm / 19.69''
  • Vertical hanging system: built-in aliscaf clamp support
  • Cooling: natural cooling of the peculiar chassis and to absence of fans
  • Connection: seamless locking system
  • Curvability: concave 2°, 5°, 10° - convex 2°, 5°
  • Body: die-cast aluminium housing
  • Color: black
  • IP rating: IP30 (front and rear)
  • Panel weight: 9kg / 19.84lbs
  • Weight per square meter: 36kg / 79.37lbs
  • Hanging Panel Quantity ≤: 20
  • Compliant Standard: CE, EMC, UL

Versions

Accessories & Related Products

OMEGAX26C45RB
OMEGAX26C45RB
(optional)
45° R indoor LED mod, SMD2121 BF, p2,6mm, 50x50cm, 192x192pix, 1.000 nit, 9 kg
OMEGAX26C45LB
OMEGAX26C45LB
(optional)
45° L indoor LED mod, SMD2121 BF, p2,6mm, 50x50cm, 192x192pix, 1.000 nit, 9 kg
OXFCM8026
OXFCM8026
(optional)
Flightcase for 8 pcs OMEGAX26B-39B series LED-display, 1.200x600x806 mm
OXDCL01
OXDCL01
(optional)
Data cable for OMEGAX LED display series assembled with RJ45, L.1 m
OXACL01
OXACL01
(optional)
Power cable for OMEGAX LED display series L.1 m
OXHGB01
OXHGB01
(optional)
Fly bar and GroundBar for OMEGAX26B and OMEGAX39T systems, 1 column
OXHGB02
OXHGB02
(optional)
Fly bar and GroundBar for OMEGAX26B and OMEGAX39T systems, 2 column
OXBS21PLUS
OXBS21PLUS
(optional)
Back wide vertical support 2 in 1
OXBS41PLUS
OXBS41PLUS
(optional)
Back wide vertical support 4 in 1
OXBS21
OXBS21
(optional)
Back narrow vertical support 2 in 1
OXBS41
OXBS41
(optional)
Back narrow vertical support 4 in 1
OXBSC
OXBSC
(optional)
Back support connectors
OXCJ88
OXCJ88
(optional)
Cabinet curve plate concave, 2°
OXCJ85
OXCJ85
(optional)
Cabinet curve plate concave, 5°
OXCJ80
OXCJ80
(optional)
Cabinet curve plate concave, 10°
OXCJ92
OXCJ92
(optional)
Cabinet curve plate convex, 2°
OXCJ95
OXCJ95
(optional)
Cabinet curve plate convex, 5°
OXCJB
OXCJB
(optional)
Ground system back horizontal support for OMEGAPIX series LED wall
OXFCIS100
OXFCIS100
(optional)
Rigging/ground-stack structure flightcase OMEGAX-DELTAX LED-display, 100cm
OXFCIS200
OXFCIS200
(optional)
Rigging/ground-stack structure flightcase OMEGAX-DELTAX LED-display, 200cm
OXFCSP
OXFCSP
(optional)
Spare part flightcase for OMEGAX-DELTAX series LED-display
NOVAMCTRLR5
NOVAMCTRLR5
(optional)
Video processor sender, res. 3840x1080, 8xRJ45 out, 4.6 kg
FMTOOL
FMTOOL
(optional)
Front maintenance tool for OMEGAX-DELTAX series LED screens (INDOOR)
MRTOOL
MRTOOL
(optional)
Mask Replacement TOOL for OMEGAX26B and OMEGAX26BE
OXXJ
OXXJ
(optional)
Metal joint used to connect 4 pcs OMEGAX26B, OMEGAX39B or OMEGAX39T, M10 hole

DOWNLOAD

Fixture Libraries / DMX Charts / VectorWorks
Photometrics
Gobos & Filter

Info Request

This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

News

04 December 2020
Ibsenhuset in Norway takes PROLIGHTS
Ibsenhuset in Norway takes PROLIGHTS
Ibsenhuset, a culture venue in Skien, Norway, has taken delivery of over one hundred fixtures from PROLIGHTS. The venue houses facilities...
01 December 2020
Poland Independence Day celebrated with PROLIGHTS
Poland Independence Day celebrated with PROLIGHTS
“A tribute to independence”, an event celebrating Polish Independence Day, took place this November at St Bridget's Church in Gdańsk,...
27 November 2020
Andrea Bocelli shines with PROLIGHTS
Andrea Bocelli shines with PROLIGHTS
Italian opera singer Andrea Bocelli played last October in Noto, Sicily. The Unesco heritage site turned into an incredible stage,...
24 November 2020
Centre for Culture in Belarus takes Prolights fixtures
Centre for Culture in Belarus takes Prolights fixtures
The multidisciplinary Centre for Culture and Leisure “Orion”, in Belarus, opened late last year, and Prolights supplied a lighting-package...
20 November 2020
PROLIGHTS delivers a Stellar Lighting Rig to Discovery Church
PROLIGHTS delivers a Stellar Lighting Rig to Discovery Church
After 15 years at their original location in Orlando, FL, Discovery Church outgrew their space's ability to effectively support their...
17 November 2020
PROLIGHTS at the Festival della Bellezza 2020
PROLIGHTS at the Festival della Bellezza 2020
Between September 11th until the 19th, the world-renowned Arena di Verona hosted the seventh edition of the “Festival della Bellezza”...
10 November 2020
Lean-pro relies on Prolights: EclPanel TWC JR for own livestream studio
Lean-pro relies on Prolights: EclPanel TWC JR for own livestream studio
Lean-pro GmbH & Co. KG has invested in Prolights EclPanel TWCJr . With the new LED softlights, the Paderborn-based company has equipped...
06 November 2020
St. Catherine's British School gets Prolights fixtures
St. Catherine's British School gets Prolights fixtures
St. Catherine's British School in Athens, Greece, took delivery of Prolights fixtures as part of the audiovisual installation of the...
02 November 2020
PROLIGHTS announces FULL AVL new distributor in The Netherlands
PROLIGHTS announces FULL AVL new distributor in The Netherlands
PROLIGHTS is thrilled to announce that it has appointed Full AVL as the new distributor for The Netherlands. Full AVL Distribution...
30 October 2020
PROLIGHTS shows solidarity with the #WeMakeEvents movement
PROLIGHTS shows solidarity with the #WeMakeEvents movement
Since the start of the pandemic, PROLIGHTS has been one of the thousands of companies worldwide in entertainment that has been largely...
23 October 2020
PROLIGHTS lit up the brightest “RTL 102.5 Power Hits” ever
PROLIGHTS lit up the brightest “RTL 102.5 Power Hits” ever
The Arena di Verona has recently hosted the “RTL 102.5 Power Hits Summer 2020” once again, in full respect of the Covid-19 rules...
20 October 2020
PROLIGHTS extends Asian reach with Acoustic & Lighting Systems
PROLIGHTS extends Asian reach with Acoustic & Lighting Systems
PROLIGHTS has strengthened its reach in Malaysia and Singapore, thanks to a new distribution agreement with Acoustic & Lighting Systems....

Subscribe to our Newsletter
This field is required.
Follow us, stay connected

Loading...